Using The Gui To Download A Customized Web Authentication Login Window - Cisco SD2008T-NA Configuration Manual

4400 series wireless lan controller
Hide thumbs Also See for SD2008T-NA:
Table of Contents

Advertisement

Chapter 9
Managing User Accounts
You can download a sample login page from Cisco WCS and use it as a starting point for your
customized login page. Refer to the "Downloading a Customized Web Auth Page" section in the Using
Templates chapter of the Cisco Wireless Control System Configuration Guide, Release 4.0 for
instructions.
If you want to download a customized web authentication login window to the controller, follow the
instructions in the GUI or CLI procedure below.

Using the GUI to Download a Customized Web Authentication Login Window

Make sure that you have a TFTP server available for the file download. See the guidelines for setting up
Step 1
a TFTP server in
Window" section on page
Step 2
Copy the .tar file containing your login page to the default directory on your TFTP server.
Step 3
Click Commands > Download File to access the Download File to Controller page (see
Figure 9-13 Download File to Controller Page
From the File Type drop-down box, choose Webauth Bundle.
Step 4
Step 5
In the IP Address field, enter the IP address of the TFTP server.
Step 6
In the Maximum Retries field, enter the maximum number of times the controller should attempt to
download the .tar file.
Range: 1 to 254
Default: 10
Step 7
In the Timeout field, enter the amount of time in seconds before the controller times out while attempting
to download the *.tar file.
Range: 1 to 254 seconds
Default: 6 seconds
Step 8
In the File Path field, enter the path of the .tar file to be downloaded. The default value is "/."
In the File Name field, enter the name of the .tar file to be downloaded.
Step 9
Click Download to download the .tar file to the controller.
Step 10
Click Security > Web Login Page to access the Web Login page.
Step 11
From the Web Authentication Type drop-down box, choose Customized (Downloaded).
Step 12
OL-9141-03
Step 8
of the
"Using the CLI to Choose the Default Web Authentication Login
9-10.
Choosing the Web Authentication Login Window
Cisco Wireless LAN Controller Configuration Guide
Figure
9-13).
9-15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sfe2000p440244042000 series2100 series

Table of Contents