Using The Gui To Retrieve The Unique Device Identifier On Controllers And Access Points - Cisco SD2008T-NA Configuration Manual

Retrieving the Unique Device Identifier on Controllers and Access Points
Using the GUI to Retrieve the Unique Device Identifier on Controllers and
Access Points
Follow these steps to retrieve the UDI on controllers and access points using the GUI.
Step 1 Click Controller > Inventory to access the Inventory page (see
Figure 7-9
This page shows the five data elements of the controller UDI.
Step 2 Click Wireless to access the All APs page.
Click the Detail link for the desired access point. The All APs > Details page appears (see
Step 3
Cisco Wireless LAN Controller Configuration Guide
7-26
Inventory Page
Chapter 7 Controlling Lightweight Access Points
Figure 7-9).
Figure 7-10).
OL-9141-03