Cisco SD2008T-NA Configuration Manual page 327

Chapter 12 Configuring Hybrid REAPWireless Device Access
If you want to customize the content and appearance of the login page that guest users will see the
e.
first time they access this WLAN, follow the instructions in
f. To add a local user to this WLAN, click Security and then click Local Net Users under AAA.
When the Local Net Users page appears, click New. The Local Net Users > New page appears (see
g.
Figure
Figure 12-6
In the User Name and Password fields, enter a username and password for the local user.
h.
In the Confirm Password field, re-enter the password.
i.
Check the Guest User check box to enable this local user account.
j.
In the Lifetime field, enter the amount of time (in seconds) for this user account to remain active.
k.
In the WLAN ID field, enter the number of the WLAN that will be accessed by the local user.
l.
In the Description field, enter a descriptive title for the local user (such as "Guest user").
m.
Click Apply to commit your changes.
n.
Click Save Configuration to save your changes.
o.
Go to the
Step 4
three access points for hybrid REAP.
OL-9141-03
12-6).
Local Net Users > New Page
"Configuring an Access Point for Hybrid REAP" section on page 12-12
Chapter 5.
Cisco Wireless LAN Controller Configuration Guide
Configuring Hybrid REAP
to configure two or
12-11