Configuring WLANs
Table 6-1
AVVID 802.1p UP-Based
Traffic Type
Network control
Inter-network control
(LWAPP control,
802.11 management)
Voice
Video
Voice control
Background (Gold)
Background (Gold)
Background (Gold)
Background (Silver)
Background (Silver)
Background (Silver)
Best Effort
Background
Background
Background
Configuring QoS Enhanced BSS (QBSS)
You can enable QBSS in these two modes:
•
•
QBSS is disabled by default.
Enabling WMM Mode
Enter this command to enable WMM mode:
config wlan wmm {disabled | allowed | required} wlan-id
•
•
Note
Cisco Wireless LAN Controller Configuration Guide
6-18
Access Point QoS Translation Values
AVVID IP DSCP
–
48
46 (EF)
34 (AF41)
26 (AF31)
18 (AF21)
20 (AF22)
22 (AF23)
10 (AF11)
12 (AF12)
14 (AF13)
0 (BE)
2
4
6
Wireless Multimedia (WMM) mode, which supports devices that meet the 802.11E QBSS standard
7920 support mode, which supports Cisco 7920 IP telephones on your 802.11b/g network
The allowed option allows client devices to use WMM on the WLAN.
The required option requires client devices to use WMM; devices that do not support WMM cannot
join the WLAN.
Do not enable WMM mode if Cisco 7920 phones are used on your network.
Chapter 6
Configuring WLANsWireless Device Access
AVVID 802.1p UP
IEEE 802.11e UP
7
–
6
7
5
6
4
5
3
4
2
2
2
2
2
2
1
1
1
1
1
1
0
0, 3
0
1
0
1
0
1
OL-1926-06OL-9141-03