Defining A Radius Server - Cisco 2100 Series Configuration Manual

Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs
Cisco 5500 Example:
7 Under service-port, (if present), enter a valid IP Address and Netmask in a different
subnet than the management interface.
8 Click the Apply button and save the changes.

Defining a RADIUS Server

If it is desired to use WPA2-Enterprise security, it is necessary to define a RADIUS server.
1 From the main menu, click SECURITY.
2 Expand RADIUS in the left pane.
3 Click Authentication.
Click New... in the right hand corner of the screen.
4
5 Enter the IP Address of the RADIUS server in the Server IP Address field.
721-1001-000-AH.docx
December 2016 17