Cisco SD2008T-NA Configuration Manual page 325

Chapter 12 Configuring Hybrid REAPWireless Device Access
Figure 12-4
Click Apply to commit your changes.
c.
Click Save Configuration to save your changes.
d.
Follow these steps if you also want to create a centrally switched WLAN that is used for guest access.
Step 3
In our example, this is the third WLAN (guest-central). You might want to tunnel guest traffic to the
controller so you can exercise your corporate data policies for unprotected guest traffic from a central
site.
Note
OL-9141-03
WLANs > Edit Page (Locally Switched WLAN)
Chapter 9 provides additional information on creating guest user accounts.
Cisco Wireless LAN Controller Configuration Guide
Configuring Hybrid REAP
12-9