Cisco SD2008T-NA Configuration Manual page 200

Configuring WLANs
Figure 6-10 AP Groups VLAN Page
To edit this new group, click Detail. The window seen in
Step 7
To map the access point group to a WLAN, choose its ID from the WLAN SSID drop-down box.
Step 8
Step 9 To map the access point group to an interface, choose its name from the Interface Name drop-down box.
Step 10 Click Add Interface-Mapping to add WLAN-to-interface mappings to the group.
Figure 6-11 AP Groups VLAN Page
When you are done adding your interface mappings, click Apply.
Step 11
Repeat Steps 4 through 11 to add more access point groups.
Step 12
Click Save Configuration to save your changes.
Step 13
Cisco Wireless LAN Controller Configuration Guide
6-28
Chapter 6 Configuring WLANsWireless Device Access
Figure 6-11 appears.
OL-1926-06OL-9141-03