Cisco SD2008T-NA Configuration Manual page 127

Chapter 4 Configuring Controller SettingsWireless Device Access
To see the TSM statistics for a particular client and the access point to which this client is associated,
4.
enter this command:
show client tsm {802.11a | 802.11b} client_mac [ap_mac | all]
The optional all command shows all access points to which this client has associated. Information
similar to the following appears:
AP Interface Mac:
Client Interface Mac:
Measurement Duration:
Note
To see the TSM statistics for a particular access point and a particular client associated to this access
5.
point, enter this command:
show ap stats {802.11a | 802.11b} ap_name tsm [client_mac | all]
The optional all command shows all clients associated to this access point. Information similar to
the following appears:
AP Interface Mac:
Client Interface Mac:
Measurement Duration:
Ol-9141-03
Timestamp
UpLink Stats
================
Average Delay (5sec intervals)............................35
Delay less than 10 ms.....................................20
Delay bet 10 - 20 ms......................................20
Delay bet 20 - 40 ms......................................20
Delay greater than 40 ms..................................20
Total packet Count.........................................80
Total packet lost count (5sec).............................10
Maximum Lost Packet count(5sec)............................5
Average Lost Packet count(5secs)...........................2
DownLink Stats
================
Average Delay (5sec intervals)............................35
Delay less than 10 ms.....................................20
Delay bet 10 - 20 ms......................................20
Delay bet 20 - 40 ms......................................20
Delay greater than 40 ms..................................20
Total packet Count.........................................80
Total packet lost count (5sec).............................10
Maximum Lost Packet count(5sec)............................5
Average Lost Packet count(5secs)...........................2
The statistics are shown in 90-second intervals. The timestamp field shows the specific
interval when the statistics were collected.
Timestamp
UpLink Stats
================
Average Delay (5sec intervals)............................35
Delay less than 10 ms.....................................20
Delay bet 10 - 20 ms......................................20
Delay bet 20 - 40 ms......................................20
Delay greater than 40 ms..................................20
Total packet Count.........................................80
Total packet lost count (5sec).............................10
Configuring Voice and Video Parameters
00:0b:85:01:02:03
00:01:02:03:04:05
90 seconds
1st Jan 2006, 06:35:80
00:0b:85:01:02:03
00:01:02:03:04:05
90 seconds
1st Jan 2006, 06:35:80
Cisco Wireless LAN Controller Configuration Guide
4-33