Cisco 4400 Series Wireless Lan Controllers - Cisco SD2008T-NA Configuration Manual

Pico Cell Functionality
Figure 1-4

Cisco 4400 Series Wireless LAN Controllers

Cisco 4400 series controllers can communicate with the network through one or two pairs of physical
data ports, and the logical management interface can be assigned to the ports. The physical port
descriptions follows:
•
•
Cisco Wireless LAN Controller Configuration Guide
1-18
Physical Network Connections to the 2000 Series Controller
For the 4402 controller, up to two of the following connections are supported in any combination:
1000BASE-T (Gigabit Ethernet, front panel, RJ-45 physical port, UTP cable).
–
1000BASE-SX (Gigabit Ethernet, front panel, LC physical port, multi-mode 850nM (SX)
–
fiber-optic links using LC physical connectors).
1000BASE-LX (Gigabit Ethernet, front panel, LC physical port, multi-mode 1300nM (LX/LH)
–
fiber-optic links using LC physical connectors).
For the 4404 controller, up to four of the following connections are supported in any combination:
1000BASE-T (Gigabit Ethernet, front panel, RJ-45 physical port, UTP cable).
–
1000BASE-SX (Gigabit Ethernet, front panel, LC physical port, multi-mode 850nM (SX)
–
fiber-optic links using LC physical connectors).
1000BASE-LX (Gigabit Ethernet, front panel, LX physical port, multi-mode 1300nM (LX/LH)
–
fiber-optic links using LC physical connectors).
Chapter 1 Overview
OL-9141-03