Using The Gui To Configure Dhcp; Using The Cli To Configure Dhcp - Cisco SD2008T-NA Configuration Manual
4400 series wireless lan controller
Hide thumbs
Also See for SD2008T-NA:
- Configuration manual (46 pages) ,
- Installation manual (160 pages)
Table of Contents
Advertisement
Chapter 6
Configuring WLANsWireless Device Access
Using the GUI to Configure DHCP
Follow these steps to use the GUI to configure DHCP.
Step 1
In the web user interface, navigate to the WLANs page.
Locate the WLAN which you wish to configure for a DHCP server, and click the associated Edit link to
Step 2
display the WLANs > Edit page.
Step 3
Under General Policies, check the DHCP Relay/DHCP Server IP Addr check box to verify whether
you have a valid DHCP server assigned to the WLAN. If you have no DHCP server assigned to the
WLAN, continue with Step 4. Otherwise, continue with Step 9.
Under General Policies, uncheck the Admin Status check box.
Step 4
Step 5
Click Apply to disable the WLAN.
Step 6
In the DHCP Relay/DHCP Server IP Addr edit box, enter a valid DHCP server IP address for this
WLAN.
Under General Policies, check the Admin Status check box.
Step 7
Step 8
Click Apply to assign the DHCP server to the WLAN and to enable the WLAN. You are returned to the
WLANs page.
In the upper-right corner of the WLANs page, click Ping and enter the DHCP server IP address to verify
Step 9
that the WLAN can communicate with the DHCP server.
Using the CLI to Configure DHCP
Follow these steps to use the CLI to configure DHCP.
In the CLI, enter show wlan to verify whether you have a valid DHCP server assigned to the WLAN. If
Step 1
you have no DHCP server assigned to the WLAN, continue with Step 2. Otherwise, continue with
Step 4.
Step 2
If necessary, use these commands:
•
•
•
In these commands, wlan-id = 1 through 16, and dhcp-server-ip-address = DHCP server IP address.
Enter show wlan to verify that you have a DHCP server assigned to the WLAN.
Step 3
Enter ping dhcp-ip-address to verify that the WLAN can communicate with the DHCP server.
Step 4
OL-1926-06OL-9141-03
config wlan disable wlan-id
config wlan dhcp_server wlan-id dhcp-server-ip-address
config wlan enable wlan-id
Cisco Wireless LAN Controller Configuration Guide
Configuring WLANs
6-5
Hide quick links:
Advertisement
Table of Contents
