Cisco SD2008T-NA Configuration Manual page 68

Configuring Dynamic Interfaces
Figure 3-6
Step 3 Enter an interface name and a VLAN identifier, as shown in
Note
Step 4 Click Apply to commit your changes. The Interfaces > Edit page appears (see
Figure 3-7
Cisco Wireless LAN Controller Configuration Guide
3-16
Interfaces > New Page
Enter a non-zero value for the VLAN identifier. Tagged VLANs must be used for dynamic
interfaces.
Interfaces > Edit Page
Chapter 3 Configuring Ports and Interfaces
Figure 3-6.
Figure 3-7).
OL-9141-03