Common Information; Set Up; System Operator Positions - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

Common Information

Common Information
The switch and the applications share the following information:
System numbering of extensions, trunks, and pools
System labeling of the user (or other input name) associated with each
extension, trunk, and pool
The coverage Group that sends its calls to the applications
The calling group set up for each service of the applications
The Reliable Disconnect setting for loop-start trunk
The Delay Ring and Coverage Delay Interval settings
The Transfer Return Time and VMS Transfer Return Interval settings

Set Up

You cannot program the common information until you have completed basic
setup programming for the communications system. Use SPM or the system
programming console to program the following:
Mode of operation
System numbering

System operator positions

Phantom extensions
Lines/Trunks to pools assignment
NOTE:
If you do not want all lines to have the same application services, you must
assign lines with the same services to the same pools
21-2 Integrated Administration