Assign Intercom Or System Access Buttons - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

Assign Intercom or System Access Buttons

Assign Intercom or System Access
Buttons
Use this procedure to assign or change the assignments for Intercom (ICOM)
buttons used to make and receive inside calls. This includes the following
types of Intercom buttons:
R i n g
Voice
Originate Only (Ring or Voice)
In Hybrid/PBX mode only, use this procedure to assign or change
assignments for System Access (SA) buttons used to make or receive inside
and outside calls. This procedure includes the following types of System
Access buttons:
Ring
Voice
Originate Only (Ring or Voice)
Shared (Ring or Voice)
NOTES:
1. You cannot change the factory setting for Call buttons assigned to QCC
operator positions, and you cannot assign Ring, Voice, Originate Only, or
Shared buttons to QCC operator positions.
System Access or Intercom buttons can be assigned only to the first 10
2.
buttons on a telephone.
3. You can assign a combination of up to 10 System Access or Intercom
buttons to each telephone (excluding QCC operator positions).
4. You can remove System Access or Intercom buttons, but at least one must
remain on the telephone.
10-8 Telephones