7-Digit Dialing Requirements - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

1 + 7-Digit Dialing Requirements

1 + 7-Digit Dialing Requirements
Use this procedure for calls placed within the same (home) area code as the
system. The procedure allows you to specify whether or not the local
telephone company requires a 1 to precede the 7-digit number. The two
available settings are:
Within Area Code. Requires that a 1 plus a 7-digit number must be
dialed; the system checks the 1 + 7-digit tables for routing.
Not Within Area Code. Does not require that a 1 precede the 7-digit
number (the system does this automatically).
Summary: 1 + 7-Digit Dialing Requirements
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
16-2 Automatic Route Selection
System manager
Hybrid/PBX
Not required
Form 3f, Automatic Route Selection Tables
Not within area code
Not within area code, Within area code
No
No
Tables ARS ARS 1+7Dial
Not within Area Code
[F8] [F6] [F1]
Within Area Code or
Enter Exit
[F1] or [F2] [F10]
Exit
[F5] [F5]