Programming Mlx Display Telephones Using The Display - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual
Communications system
Hide thumbs
Also See for MERLIN LEGEND Release 3.0:
- System programming manual (818 pages) ,
- System programming and maintenance manual (128 pages) ,
- Installation manual (608 pages)
Table of Contents
Advertisement
General Feature Use and Telephone
Programming
Table D-4. Programming MLX Display Telephones Using the Display
Step
1
Label the button to be
programmed.
Note: Skip this step if the
feature will not be
programmed onto a button.
2
Begin programming.
Identify the button to be
3
programmed.
D-16 Programming Summary
Action
Remove the clear label cover from
the telephone by pulling upon the
tab that extends from the top of
the cover.
Write the feature name on the card
next to the button to be
programmed.
Replace the cover.
Press Menu.
Select Ext Program from the
display.
Select Start from the display.
Press the button you labeled.
Note: If the feature does not get
programmed onto a button, press
any line button. This does not
affect the button in any way.
The display identifies the feature
currently programmed on the
button. If no feature is
programmed, the display indicates
that the button is blank.
Continued on next page
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the MERLIN LEGEND Release 3.0 and is the answer not in the manual?