Remote Access Without Barrier Codes - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

Remote Access Without Barrier Codes

Remote Access Without Barrier
Codes
Use this procedure to change the class of restriction for one of the following:
All non-tie lines/trunks
All tie trunks and DID trunks with Remote Access
DID remote access code
NOTE:
If barrier code requirements have been established for remote access users,
use "Remote Access with Barrier Codes" and not this procedure.
The class of restriction assigned may be one of the following:
Restriction. Determines whether remote access users can make local
and/or toll calls and includes the following settings:
— Unrestricted
— Toll restricted
— Outward restricted
ARS Facility Restriction Level (Hybrid/PBX only). Allows or disallows
use of outgoing trunks by assigning a facility restriction level from 0
through 6. The FRL ranges from 0 (most restrictive) to 6 (least
restrictive). The FRL value assigned here is the opposite of the FRL
value assigned to the ARS route, where a value of 0 is the least
restrictive, and a value of 6 is the most restrictive.
Allowed Lists Assignment. Assigns Allowed Lists and is used when
remote access users are restricted from making local or toll calls.
Disallowed Lists Assignment. Assigns Disallowed Lists and is used
when remote access users are not restricted from making local or toll
calls.
System Features 15-33