Group Calling Line/Trunk Or Pool Assignments - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

Group Calling Line/Trunk or Pool Assignments

Group Calling Line/Trunk or Pool
Assignments
Use this procedure to assign or remove lines, trunks, or pools (Hybrid/PBX
only) that ring directly into a calling group.
Incoming calls on each line/trunk or pool can be directed to only one calling
group.
To reassign a line/trunk or pool to a new calling group,
from its old group before making the new assignment.
Summary: Group Calling Line/Trunk or Pool
Assignments
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System manager
All
Not required
Form 7d, Group Calling
Not applicable
Line, trunk, or pool number
Yes
No
More
Extensions
calling group ext. no.
Enter Exit Exit
[F6] [PgUp] [F4]
[F10] Type line/trunk no.
Optional Group-Assigned Features 14-9
you must remove it
Grp Calling Line/Pool
Dial line/trunk no.
Enter
Exit
[F10] Type calling group ext. no.
[F10] [F5] [F5]
Dial
[F5]