System Programming Position Assignment - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

System Programming Position Assignment

System Programming Position
Assignment
Use this procedure to reassign the extension used for system programming.
This extension should not be the same extension as that used for the operator
position. The system programming position can be reassigned only to one of
the first five extension jacks on the first MLX module. Only one system
programming console is allowed per system.
If you are programming on the console, be aware of the following:
The console must be connected to the extension currently assigned
for system programming.
As soon as you change the system programming extension, the
system programming session is terminated. To proceed with system
programming, you must connect the system programming console to
the newly assigned extension and enter system programming again.
NOTE:
The telephone used for system programming must be an MLX-20L.
Basic System Operating Conditions 2-3