Qcc Queue Priority Level - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

QCC Queue Priority Level

QCC Queue Priority Level
Use this procedure to assign QCC queue priority level values (1 to 7) to each
loop-start, ground-start, and automatic-in tie trunk in your system. The value
assigned determines the order in which calls are sent to the QCC operator
positions. Call priority 1 is the highest priority, and 7 is the lowest priority.
NOTE:
This procedure applies to Hybrid/PBX mode only in a system that includes
QCC operator positions.
5-14 Lines and Trunks