C-1. Line Or Trunk Feature Status - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

LED Displays
Table C-1. Line or Trunk Feature Status
System
Programming
Menu
Option Option
Lines Trunks Tie Lines
Inmode
Outmode
Dialtone
Lines Trunks TT/LS Disc
Outmode
Pools
Lines Trunks
Lines Trunks Toll Type
Hold Disconc
Lines Trunks
Lines Trunks LS-ID Delay
Extensions Lines Trunks
*
LED Status is indicated on LEDs next to the 20 buttons below the display area of the system programming console
or simulated on the computer screen when using SPM.
† This is the factory setting.
C-2 Programming Summary
Green LED
ON
Incoming tie line Incoming tie line
is rotary dial†
is touch-tone
Outgoing tie line Outgoing tie line
is rotary dial†
is touch-tone
Remote dial
Local dial tone
tone†
Line/trunk is
Line/Trunk is
rotary dial
touch-tone†
Must dial 1 + 1 + dialing is not
area code † needed
Short-50 ms
Long-450 ms†
LS-ID Delay is
LS-ID Delay is
on Off†
Line/trunk or
Line/trunk or
pool is not
pool is assigned
to button assigned to
button
LED Status*
OFF ON
Trunk is in pool
Trunk is
assigned to a
pool
Red LED
OFF
Trunk is not in
pool