Maximum Number Of Operator Positions - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

Primary Operator Positions
Table 4-1 shows the maximum number of operator positions allowed for any
one system.
Table 4-1. Maximum Number of Operator Positions
Position Type
QCC
DLC
Total QCC + DLC
Any combination of operator positions can be assigned as long as no more
than four operator positions are QCCs and the total number of operator
positions does not exceed eight.
If you want to designate a new operator position and the system already has
the maximum number of operator positions, you must change an existing
operator position to a nonoperator position before you designate a new
operator position.
NOTE:
When you change an extension to an operator position, or vice versa, the
system returns the port (extension jack) type of that extension to the factory
setting. You must reprogram lines and any features for that telephone or
console. You may also need to change any attached accessory equipment
and optional features.
4-2 System Operator Positions
Type of Telephone
MLX-20L
MLX-20L
MLX-28D
Analog multiline telephones
MERLIN II Display Consoles
Maximum Positions
4
8
8