Incoming Routing - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

Incoming Routing

Incoming Routing
Use this procedure to specify whether incoming routing is by line appearance
or according to dial plan. Dial Plan Routing is available in Hybrid/PBX mode
only.
Summary: Incoming Routing
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
9-8 PRI Facilities
System manager
Line appearance: Hybrid/PBX, Key; Dial Plan Routing:
Hybrid/PBX Only
Not required
Form 3b, Incoming Trunks: DS1 Connectivity
(100D module)
Line appearance
Dial Plan Routing, Routing by Line Appearance
No
No
LinesTrunks PRI
Dial B-channel group no.
routing
Enter Exit
[F4] [F6] [F2]
[F10] Specify method of routing
[F5]
B-ChannlGrp Incoming Rtg
Specify method of
Enter
Exit Exit
[F6] Type B-Channel group no.
[F10] [F5] [F5]