Copy Line/Trunk Assignments - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

Copy Line/Trunk Assignments

Copy Line/Trunk Assignments
Use this procedure to copy outside line/trunk button assignments, pool
dial-out code restrictions (Hybrid/PBX only), and (for operator positions only)
Night Service information from one extension to another extension or block of
extensions with identical requirements.
If you are copying assignments to a block of extensions and one of the
extensions in the block is in use, the display shows the Station Busy - Pls
Wait message. Copying for the rest of the extensions in the block is delayed
until the busy extension becomes idle. The number of the busy extension is
not shown. If a DSS is attached, the LED associated with the busy extension
is on. If you exit instead of waiting for the busy extension to become idle,
copying for the rest of the extensions is canceled; however, the assignments
that have already been copied are not canceled.
If you are copying assignments from an operator position to a block of
extensions that includes both operator and nonoperator extensions, the
information is copied only to the operator positions; the nonoperator positions
are not affected. Similarly, if you are copying assignments from a nonoperator
position to a block of extensions that includes both operator and nonoperator
extensions, the information is copied only to the nonoperator positions; the
operator positions are not affected. The system does not provide an error tone
to signal that the copy did not work for all of the extensions in the block.
10-6 Telephones