Night Service With Time Set - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

Night Service with Time Set

Night Service with Time Set
Use this procedure to specify the time of day and the days of the week when
Night Service is to be activated and deactivated.
Enter the time of day as 4 digits, using 24-hour notation. Enter the day of the
week as a single digit (0 to 6), with 0 being Sunday. If you enter an invalid
number, the system truncates the number.
If you change the system time while Night Service is active, Night Service is
deactivated automatically and you must manually reactivate it.
Operators can override the timer and turn Night Service on and off manually.
This feature can be deactivated when out-of-the-ordinary situations occur (for
example, a midweek holiday).
NOTE:
For Release 2.1 and earlier, after setting Start and Stop time for Night Service
the current day of the week for Night Service must be set using the following
procedure.
If system programming information is being loaded into memory from a
backup diskette, the current day of the week must be reset.
Night Service can be turned off by using the following procedure:
NightSrvce Day of Week
week
Enter Exit
NightSrvce Day of Week
Dial the current day of the
Dial 9
Enter Exit
Night Service 17-5