Invalid Destination - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

Invalid Destination

Invalid Destination
Use this procedure to specify whereto direct outside calls (received on DID
trunks) for unassigned extension numbers. Calls can be directed to a backup
position (normally the primary system operator) or given a fast busy signal.
See "QCC Operator to Receive Call Types" in Chapter 13 for information on
assigning a backup position.
Summary: Invalid Destination
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System manager
Hybrid/PBX
Not required
Form 3d, incoming Trunks: DID
Backup (calls are sent to the primary system operator)
Backup, Fast Busy
No
No
LinesTrunks DID
Extension or Return Fast Busy
[F4] [F4] [F9]
InvalDstn Send to Backup
Enter
[F1] or [F2] [F10]
Exit Exit
[F5] [F5]
DID Trunks 8-9