Group Type - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

Group Type

Group Type
Use this procedure to determine whether or not the system automatically logs
in members of a calling group after a power failure. This setting also
determines the type of voice messaging interface when the calling group is
used to connect voice messaging or automated attendant applications. The
settings are listed below.
Automatic Log Out. Used for calling groups to specify that the
system does not automatically log in calling group members after a
power failure. Calling group members must manually log themselves
into the group.
Automatic Log In. Used for calling groups that consist of fax
machines or data stations (also called data hunt groups) to specify
that the system automatically logs in calling group members after a
power failure. This setting can also be used for calling groups
consisting of telephones.
Integrated VMI. Used when a voice messaging system that requires
special signaling for integrated operation (for example, AUDIX Voice
Power, IS II/III, or MERLIN MAIL Voice Messaging System) is
connected to one or more extension jacks assigned to a calling group.
The system automatically logs in the group members after a power
failure.
Generic VM. Used when a voice messaging system that does not
need special signaling (for example, MERLIN Attendant) is connected
to one or more extension jacks assigned to a calling group. The
system automatically logs in the group members after a power failure.
14-18 Optional Group-Assigned Features