AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual page 159

Assign Intercom or System Access Buttons
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
Hybrid/PBX Mode. System Access Ring (SA Ring),
System Access Voice (SA Voice), and System Access
Originate Only Ring (SA Orig Only) buttons are assigned
to all analog multiline and MLX telephones, excluding
operator positions. Two System Access Ring buttons and
a System Access Originate Only Ring button are
assigned to tip/ring equipment (for example, single-line
telephones or fax machines connected to an 012
module). No personal line or pool buttons are assigned.
All Modes. System Access Ring (Hybrid/PBX mode) or
Intercom Ring (Key and Behind Switch modes), System
Access Voice (Hybrid/PBX mode) or Intercom Voice (Key
and Behind Switch modes), and the first 18 through 29
lines connected to the control unit are assigned to all
DLC operator positions. The number of lines assigned
depends on the type of telephone used as a DLC
operator position. Refer to the appropriate telephone
planning form for details.
Not applicable
Yes: specific button options.
Yes (You can copy additional SA buttons to another
extension, but you cannot overwrite SA buttons that are
already assigned.)
To program extension:
More
Cntr-Prg
Start Program extension
To copy extension programming:
More
Cntr-Prg
Dial copy to ext. no.
Enter
To program extension:
[PgUp] [F4] [F1]
extension [F10]
To copy extension programming:
[PgUp] [F4] [F2]
copy to ext no. [F10]
Program Ext.
Enter
Copy ext. Dial copy from ext. no.
Enter
Type ext. no. [F10]
[F5] [F5]
Type copy from ext. no.
[F5] [F5]
Dial ext. no.
Enter
Exit Exit
Exit Exit
Program
[F10] Type
Telephones 10-11