Remote Access With Barrier Codes - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

Remote Access with Barrier Codes

Remote Access with Barrier Codes
Use this procedure to change the class of restriction for individual remote
access barrier codes. The class of restriction assigned to each barrier code
allows or denies the use of the following system features:
Restriction. Determines whether remote access users can make local
and/or toll calls, and includes the following settings:
— Unrestricted
— Toll restricted
— Outward restricted
ARS Facility Restriction Level (Hybrid/PBX only). Allows or restricts
use of outgoing trunks by assigning a facility restriction level (FRL)
from 0 through 6. The FRL ranges from 0 (most restrictive) to 6 (least
restrictive). The FRL value assigned here is the opposite of the FRL
value assigned to the ARS route, where a value of 0 is the least
restrictive, and a value of 6 is the most restrictive.
Allowed Lists Assignment. Assigns Allowed Lists and is used when
remote access users are restricted from making local or toll calls.
Disallowed Lists Assignment. Assigns Disallowed Lists and is used
when remote access users are not restricted from making local or toll
calls.
A maximum of eight Allowed or Disallowed Lists can be assigned to each
barrier code. Class of restriction settings apply to individual barrier codes.
NOTE:
If barrier code requirements have not been established or have been
removed for remote access users, do not use this procedure. See "Remote
Access Without Barrier Codes."
15-38 System Features