Voice And/Or Data Routing - AT&T MERLIN LEGEND Release 3.0 Programming Summary Manual

Voice and/or Data Routing

Voice and/or Data Routing
Use this procedure to route voice, data, or voice and data. The voice/data
specification is used mainly in conjunction with PRI. See Chapter 9, "PRI
Facilities," especially its subtopic, "Outgoing Tables."
Voice/data routes can be associated with Subpattern A or Subpattern B.
Summary: Voice and/or Data Routing
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System manager
Hybrid/PBX
Not required
Form 3g, Automatic Route Selection Default and Special
Numbers Tables
Voice
Voice Only, Data Only, Voice Data
No
No
More
Tables ARS
Dial table no. and route no.
Enter Exit
[F8] [F6] [PgUp]
route no. [F10] Select capability
Sub A Data or Sub B Data
Enter
Exit
[F7] or [F8] Type table no. and
[F10]
Automatic Route Selection 16-13
Select capability
[F5] [F5]