Network Url Filter Commands; Set - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

3-256 WS2000 Wireless Switch System Reference Guide
3.49.1 Network URL Filter set Command

set

Network URL Filter Commands

Sets URL FIlter parameters.
Syntax
set [mode|tcp-port|error-msg|action]
set mode <mode>
set tcp-port <tcp-port>
set error-msg <error-msg>
set action <action>
Parameters
mode <mode>
set tcp-port <tcp-port>
set error-msg <error-msg>
set action <action>
Example
admin(network.urlfilter)> show
URL Filter Mode
TCP Port Number
Error Message
admin(network.urlfilter)>admin(network.urlfilter)>set mode enable
admin(network.urlfilter)>set tcp-port 100
admin(network.urlfilter)>set error-msg "Error message"
admin(network.urlfilter)>set action deny
admin(network.urlfilter)>show
URL Filter Mode
TCP Port Number
Error Message
Action on DNSRD reply failure
Sets the URL Filter mode. <mode> can be
Sets the TCP Port for URL Filtering to <tcp-port>.
Sets the error message to the string <error-msg> for URL Filtering. This error
message is displayed when there is an error while accessing the page the
user had requested.
Sets the default action for URL Filtering when reverse DNS look-up fails.
<action> can be one of allow
: Disable
: 0
:
: Disable
: 80
: policies of your service provider
: deny
enable or disable.
or deny.