Set - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

3.7.1 Network AP Smartscan set Command

set

Network AP Smartscan Commands
Sets the smartscan channels. These channels are the ones that are scanned for presence of WLANs.
Syntax
set [11a <11a>|11bg <11bg>]
Parameters
11a <11a>
11bg <11bg>
Example
admin<network.ap.smartscan>> set 11bg 1-6,8,10-12
admin(network.ap.smartscan)> show all
smart scan 11a channels
smart scan 11bg channels
Available valid 11a channels
161 165
Available valid 11bg channels
Sets the smart scan channel list for the 5 GHz band. Channel list <11a> should
be a comma separated list. For example, 36,40,44,48
Sets the smart scan channel list for the 2.4 GHz band. Channel list <11bg>
should be a comma separated list. For example, 1-4,6,8
Note: When using a range for selecting multiple channels, all the channels that are
included in the range should be valid channel numbers for the current regulatory domain.
:
: 1 2 3 4 5 6 8 10 11 12
: 36 40 44 48 52 56 60 64 149 153 157
: 1 2 3 4 5 6 7 8 9 10 11 12 13
Network CLI Commands Reference
3-35