Add - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

3.14.1 Network Firewall Policy Inbound add Command

add

Network Firewall Policy Inbound Commands
Adds an inbound firewall policy.
Syntax
add <sip> <netmask> <dip> <dnetmask>
Parameters
<sip> <netmask>
<dip> <dnetmask>
Example
admin(network.fw.policy.inb)>add 192.168.24.0 255.255.255.0
209.239.170.45 255.2 55.255.224
Inbound Policy Successfully added at index 1
admin(network.fw.policy.inb)>list
-------------------------------------------------------------------------
Idx Src IP-Netmask
Action
-------------------------------------------------------------------------
1 192.168.24.0-
deny
255.255.255.0
Related Commands
delete
move
Adds a firewall policy to be effective on communications between a source site
and a destination site.
• <sip> – The source IP
• <snetmask> – The source IP's network mask
• <dip> – The destination site IP
• <dnetmask> – The destination IP's network mask
Dst IP-Netmask
209.239.170.45-
255.255.255.224
Deletes firewall policies from the inbound list.
Moves firewall policies either up or down in the list of policies.
Network CLI Commands Reference
Tp SPorts DPorts Rev. NAT
all 1: 1:
65535 65535
3-67
0.0.0.0
nat port 0