Set - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

4.18.4 System SNMP Traps set Command

set

System SNMP Traps Commands
Sets SNMP trap parameters.
Syntax
set [cold|cfg|lowcf|port|dos-attack|snmp-auth|snmp-acl|mu-assoc|
mu-unassoc|mu-deny-assoc|mu-deny-auth|ap-adopt|ap-unadopt|
ap-denied-adopt|ap-radar|rogue-ap|hotspot-mu-state|
user-login-failure|interface|admin-passwd-change|dyndns-update|
wids-mu|wids-radio|wids-switch|ips] <mode>
set cf-thresh <memory_kb>
set min-pkt <pkt>
set dos-rate-limit <seconds>
set rate <rate> <scope> <value>
Parameters
set [cold|cfg|lowcf|port|dos-attack|snmp-auth|snmp-acl|mu-assoc|mu-unassoc|
mu-deny-assoc|mu-deny-auth|ap-adopt|ap-unadopt|ap-denied-adopt|ap-radar|
rogue-ap|hotspot-mu-state|user-login-failure|interface|admin-passwd-change|
dyndns-update|wids-mu|wids-radio|wids-switch|ips] <mode>
Sets the different SNMP parameters. <mode> can be one of
• cold – Configuration changed trap
• cfg – Configuration mode trap
• lowcf – Low compact flash memory trap
• port – Physical port status change trap
• dos-attack – Denial of Service (DOS) attack trap
• snmp-auth – Authentication failure trap
• snmp-acl – SNMP ACL violation trap
• mu-assoc – MU associated trap
• mu-unassoc – MU un-associated trap
• mu-deny-assoc – MU denied association trap
• mu-deny-auth – MU authentication denied trap
• ap-adop – AP adopted trap
• ap-unadop – AP un-adopted trap
• ap-denied-adopt – AP denied trap
• ap-radar – AP radar trap
• rogue-ap – Rogue AP trap
• hotspot-mu-state – Hotspot MU change state trap
• user-login-failure – User login failure trap
• ips – Intrusion Prevention System trap
• interface – Interface status change trap
System CLI Commands Reference
enable or disable.
4-83