Set - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

3.18.4 Network LAN DHCP set Command

set

Network LAN DHCP Commands
Sets DHCP parameters for the subnets.
Syntax
set [dgw|dns|wins|lease|domain|mode|range|
relayserverip|ddnsmode|fwdzone|ddnsusrcls|
tftp-server|bootfile|option-189|option-43]
Parameters
dgw <idx> <a.b.c.d>
dns <a> <b> <c>
wins <idx> <a.b.c.d>
lease <idx> <lease>
domain <idx> <dn>
mode <idx> <mode>
range <a> <b> <c>
relayserverip <idx> <a.b.c.d> Sets the DHCP relay server IP for subnet <idx> (1-6) to the IP <a.b.c.d>.
ddnsmode <idx> <mode>
fwdzone <idx> <fwdzone>
ddnsusrcls <idx> <usrcls>
tftp-server <idx>
<tftp-server>
bootfile <idx> <bootfile>
Sets the default gateway for subnet <idx> (1–6) to the IP address
<a.b.c.d>.
Sets the primary/secondary DNS servers for the selected subnet.
• <a> – The subnet (1-6)
• <b> – The DNS server type (1=primary, 2=secondary)
• <c> – The IP address of the server type selected in <b> in the a.b.c.d form.
Sets the WINS server for subnet <idx> (1–6) to the IP address <a.b.c.d>.
Sets the DHCP lease time for subnet <idx> (1–6) to <lease> seconds
(1–999999).
Sets the domain name for subnet <idx> (1–6) to the domain name <dn>
(1 to 63 characters).
Sets the DHCP mode for subnet <idx> (1–4) to <mode>.
<mode> can be one of (none, client, server, relay) where:
• none – disables DHCP node
• client – enables the subnet to be a DHCP client
• server – enables the subnet to be a DHCP server
• relay – enables the subnet to be a DHCP relay
Sets the DHCP assignment range for subnet <a> (1–6) from IP address <b>
to another IP address <c>.
Enables or disables DDNS for the subnet <idx> (1-6). <mode> can be one
of enable or disable.
Sets the DHCP forward zone for the subnet <idx> (1-6) to the zone specified
by <fwdzone> (1 to 63 characters)
Sets the DDNS user class <usrcls> to
<idx> (1-6).
Sets the tftp-server IP for the subnet <idx> (1-6) to the IP <tftp-server>
Sets the bootfile name for the subnet <idx> (1-6) to the boot file name
<boot-file> (max 31 characters)
Network CLI Commands Reference
single or multiple for the subnet
3-97