Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual page 211

Wireless switch
Hide thumbs Also See for WS2000 - Wireless Switch - Network Management Device:
Table of Contents

Advertisement

set tkip [key|type|phrase|rotate-mode|interval|wpa2|preauth|pmk]
set tkip key <idx> <key>
set tkip type <idx> <type>
set tkip phrase <idx> <phrase>
set tkip [rotate-mode|wpa2|preauth|pmk] <idx> <mode>
set tkip interval <idx> <interval>
set ccmp [key|type|phrase|rotate-mode|interval|mixed-mode|preauth|opp-
pmk]
set ccmp key <idx> <key>
set ccmp type <idx> <type>
set tkip phrase <idx> <phrase>
set tkip [rotate-mode|mixed-mode|preauth|opp-pmk] <idx> <mode>
set tkip interval <idx> <interval>
set wep-mcm [index|key]
set wep-mcm index <a> <b>
set wep-mcm key <a> <b> <c>
set mu-inact <timeout>
set wep_shared <mode>
set handshake-timeout <idx> <timeout>
set handshake-retry-count <idx> <retry-count>
Parameters
acl <idx> <mode>
adopt <idx> <mode>
auth <idx> <type>
bcast <idx> <mode>
eap adv mu-quiet <idx>
<period>
eap adv mu-tx <idx> <period> Sets the EAP MU/supplicant TX period for WLAN <idx> (1–8) to
eap adv mu-timeout <idx>
<timeout>
eap adv mu-retry <idx> <retry> Sets the EAP maximum number of MU retries to <retry> (1–10) for WLAN
eap adv server-timeout <idx>
<timeout>
eap adv server-retry <idx>
<retry>
Sets the default MU access control mode <mode> to
WLAN <idx> (1–8).
Sets default Access Port adoption mode <mode> to
WLAN <idx> (1–8).
Sets the authentication type for WLAN <idx> (1–8) to <type> (none,
eap, or kerberos).
Note: EAP parameters are only in effect if "eap" is specified for the authentication
method (set auth <idx> <type>).
Enables
or
disables
the broadcast ESS answer for the WLAN <idx> (1–
8).
Sets the EAP MU/supplicant quiet period for WLAN <idx> (1–8) to
<period> seconds (1–65535).
<period> seconds (1–65535).
Sets the EAP MU/supplicant timeout for WLAN <idx> (1–8) to <timeout>
seconds (1–255).
<idx> (1–8).
Sets the server timeout for WLAN <idx> (1–8) to <timeout> seconds (1–
255).
Sets the maximum number of server retries for WLAN <idx> (1–8) to
<retry> (1–10).
Network CLI Commands Reference
allow
or
deny
allow
or
deny
3-175
for
for

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents