13.42 Network IP Filter Commands
WS2000>admin(network)> ipfilter
Description:
Displays the IP Filter submenu.
IP based filtering allows administrators to configure Incoming and Outgoing IP filtering policies on packets
within the same Subnet / WLAN and between wired and wireless hosts. Filters can be set up based on IP
Address or as a default rule for all IPs in a given direction.
The items available under this command are shown below.
add
Adds a filter to the global IP Filter table.
del
Deletes a filter from the global IP Filter table.
show
Shows the global IP Filter table.
save
Saves the configuration to system flash.
quit
Quits the CLI.
..
Goes to the parent menu.
/
Goes to the root menu.
Command Line Interface Reference
13-223