Set - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

3.16.4 Network Firewall Submap set Command

set

Network Firewall Submap Commands
Sets a default subnet access rule to allow or deny communication.
Syntax
set [default|subnet-logging|logging]
Parameters
default <from>
<to> <rule>
subnet-logging
<from> <to>
[enable|disable]
logging <from>
<to> <rule-name>
[enable|disable|d
efault]
Example
admin(network.fw.submap)>set default s2 w deny
admin(network.fw.submap)>set default s2 s4 deny
admin(network.fw.submap)>set subnet-logging s2 s3 enable
admin(network.fw.submap)>set logging s1 s2 s1s2allow default
admin(network.fw.submap)>show default s2
-------------------------------------------------------------------------
wan subnet1
subnet6
-------------------------------------------------------------------------
deny allow
allow
admin(network.fw.submap)>
Sets the default subnet access rule.
• <from> – The source subnet. (one of
s4 = subnet4, s5 = subnet5,
• <to> – The destination subnet. (one of
s4 = subnet4, s5 = subnet5,
• <rule> – The rule to be enforced. Select from
Enables or disables logging for a subnet access rule.
• <from> – The source subnet. (one of
s4 = subnet4, s5 = subnet5,
• <to> – The destination subnet. (one of
s4 = subnet4, s5 = subnet5,
• enable – Enables he logging
• disable – Disables logging
Enables, disables, or sets to default the logging for a subnet access exception rule.
• <from> – The source subnet. (one of
s4 = subnet4, s5 = subnet5,
• <to> – The destination subnet. (one of
s4 = subnet4, s5 = subnet5,
• enable – Enables he logging
• disable – Disables logging
• default – Adopts subnet access configuration.
subnet2
allow
Network CLI Commands Reference
s1 = subnet1, s2
s6 = subnet6).
s1 = subnet1, s2
s6 = subnet6, w = WAN).
allow or
s1 = subnet1, s2
s6 = subnet6).
s1 = subnet1, s2
s6 = subnet6, w = WAN).
s1 = subnet1, s2
s6 = subnet6).
s1 = subnet1, s2
s6 = subnet6, w = WAN).
subnet3 subnet4
allow deny
(log enabled)
= subnet2, s3 = subnet3,
= subnet2, s3 = subnet3,
deny.
= subnet2, s3 = subnet3,
= subnet2, s3 = subnet3,
= subnet2, s3 = subnet3,
= subnet2, s3 = subnet3,
subnet5
allow
3-85