Revert - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

3.46.5 Network WIPS revert Command

revert

Network WIPS Command
Reverts a dedicated Sensor device to an AP. This command is only valid for Motorola AP300.
Syntax
revert <mac1> <mac2> ...
Syntax:
revert <mac1> <mac2>
...
Example
admin(network.wips)> revert 00a0f8bf8a70
Revert is started in the background
admin(network.wips)> list aps
-------------------------------------------------------------------------
----
Idx AP MAC
-------------------------------------------------------------------------
----
1 00a0f8bf8a70
Converts the list of Sensors represented by their MAC addresses <mac1>
<mac2>... to APs.
Conversion State
Network CLI Commands Reference
3-243