Delete - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

4-74 WS2000 Wireless Switch System Reference Guide
4.17.2 System SNMP Access delete Command

delete

System SNMP Access Commands
Deletes SNMP access entries.
Syntax
delete [acl|v1v2c|v3] [<idx>|all]
Parameters
delete
[acl|v1v2c|v3]
[<idx>|all]
Example
admin(system.snmp.access)>list acl
-------------------------------------------------------------------------
index start ip
-------------------------------------------------------------------------
1 209.236.24.1
admin(system.snmp.access)>delete acl all
admin(system.snmp.access)>list acl
-------------------------------------------------------------------------
index start ip
-------------------------------------------------------------------------
admin(system.snmp.access)>list v3 all
index
username
access permission
object identifier
security level
auth algorithm
auth password
privacy algorithm
privacy password
index
username
access permission
object identifier
security level
auth algorithm
auth password
privacy algorithm
privacy password
Deletes SNMP access entries.
• acl – Deletes SNMP access list entries
• v1v2c – Deletes entries from the SNMP v1/v2 configuration list
• v3 – Deletes entries from the SNMP v3 configuration list.
• <idx> – Deletes entry with index <idx>
• all – Deletes all entries.
end ip
209.236.24.46
end ip
: 1
: fred
: read/write
: 1.3.6.6
: none
: md5
: ********
: des
: ********
: 2
: judy
: read/write
: 1.3.6.1
: auth/priv
: md5
: ********
: des
: ********