Add - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

3-110 WS2000 Wireless Switch System Reference Guide
3.21.1 Network Router add Command

add

Network Router Commands
Adds user-defined routes.
Syntax
add <dest> <netmask> <gw> <iface> <metric>
Parameters
<dest> <netmask> <gw>
<iface> <metric>
Example
admin(network.router)>add 202.57.42.6 255.255.255.224 202.57.42.1 s2 3
admin(network.router)>list
------------------------------------------------------------------
index destination
metric
------------------------------------------------------------------
1 202.57.42.6
admin(network.router)>add 234.44.33.212 255.255.255.234 234.44.33.2 s3 5
admin(network.router)>list
------------------------------------------------------------------
index destination
metric
------------------------------------------------------------------
1 202.57.42.6
2 234.44.33.212
Adds a route with destination IP address <dest>, IP netmask
<netmask>, gateway IP address <gw>, interface subnet or WAN set to
<iface> (one of s1 = subnet1,
s5 = subnet5, s6 = subnet6 or
15).
netmask
255.255.255.224
netmask
255.255.255.224
255.255.255.234
s2 = subnet2, s3 = subnet3,
w = WAN), and metric set to <metric> (1–
gateway interface
202.57.42.1 subnet2
gateway interface
202.57.42.1 subnet2
234.44.33.2 subnet3
s4 = subnet4,
3
3
5