Show - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

3.3.3 Network AP Default show Command

show

Network AP Default Commands
Shows the default Access Port parameters for a particular radio type.
Syntax
show [default|img-location]
Parameters
default <type> Shows the default Access Port parameters for radio type <type>
802.11bg).
img-location Shows the Sensor/Access Port image locations.
Example
admin(network.ap.default)>set ch_mode 802.11a fixed
admin(network.ap.default)>set dtim 802.11a 10
admin(network.ap.default)>set short 802.11b/g enable
admin(network.ap.default)>show default 802.11a
ap indoor use
ap channel
ap channel mode
ap radio power
ap diversity
basic rates
supported rates
rts threshold
beacon interval
----------------------------------------------------------------------
BSSID | DTIM period
----------------------------------------------------------------------
1 | 10
2 | 10
3 | 10
4 | 10
short preamble
primary wlan index
Related Commands
set Sets the default parameters for the specified radio type.
Network CLI Commands Reference
: indoor only
: 36
: random
: 17 dBm
: 50 mW
: full
: 6 12 24
: 6 9 12 18 24 36 48 54
: 2341
: 100
: disable
: wlan1
3-21
(802.11a, 802.11b,