Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual page 327

sensor-fw [ Sets sensor firmware information.
file <filename>|
• file <filename> – Sets the sensor firmware file name to <filename> (up to
path <path|
max-size <size>]
• path <path> – Sets the firmware file path for the sensor to <path> (up to
• max-size <size> – Sets the maximum file size of the sensor firmware file to
import-enc-password Enables or disables the import of encrypted passwords for the admin and
<mode> manager logins. <mode> can be one of
bind-interface <bind- Sets the interface to bind <bind-interface> (s1-s6, w, none where s1-Subnet 1,
interface> s2-Subnet 2,..., s6-Subnet 6, w-WAN) during ftp.
ap300 [file|path| Sets AP300 firmware update parameters.
max-size|legacy-mode]
• file <filename> – Sets AP300 firmware file name
• path – Sets firmware file path
• max-size – Sets maximum size for AP300 firmware file
• legacy-mode – Sets AP300 fw legacy mode
Example
FTP Set Example
admin(system.config)>set server 192.168.22.12
admin(system.config)>set user myadmin
admin(system.config)>set passwd
admin(system.config)>export ftp
Export operation
Building configuration file
File transfer
File transfer
Export operation
Firmware Example
admin(system.config)>set fw file mf_01050000160B.bin
admin(system.config)>set fw path /tftp/myadmin/
admin(system.config)>update tftp s1
characters).
characters).
<size>.
• filename – Sets the file name. The range is 1 to 39 characters.
: [ Started ]
: [ Done ]
: [ In progress ]
: [ Done ]
: [ Done ]
System CLI Commands Reference
enable or disable.
4-17
39
39