Network Ap Mesh Commands; Mesh - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

3-40 WS2000 Wireless Switch System Reference Guide

3.9 Network AP Mesh Commands

mesh

Network AP Commands
Displays the mesh submenu. Use this menu to configure the different Mesh Network parameters.
Syntax
admin(network.ap)> mesh
admin(network.ap.mesh)>
The items available under this command are shown below.
Command
set
add
del
preferred-list
available-list
show
quit
save
..
/
Sets mesh parameters
Adds a preferred base to the list
Removes preferred bases from the list
Shows a list of preferred bases
Shows a list of available bases
Shows mesh configuration information
Quits the CLI.
Saves the configuration to system flash.
Goes to the parent menu.
Goes to the root menu.
Description Ref
page 3-41
page 3-43
page 3-44
page 3-45
page 3-46
page 3-47
page 3-1
page 3-1
page 3-1
page 3-1