Show - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

3-86 WS2000 Wireless Switch System Reference Guide
3.16.5 Network Firewall Submap show Command

show

Network Firewall Submap Commands
Displays default subnet access exception rules for indicated subnet.
Syntax
show default <from>
Parameters
default <from>
Example
admin(network.fw.submap)>set default s2 w deny
admin(network.fw.submap)>set default s2 s4 deny
admin(network.fw.submap)>set subnet-logging s2 s3 enable
admin(network.fw.submap)>set logging s1 s2 s1s2allow default
admin(network.fw.submap)>show default s2
-------------------------------------------------------------------------
wan subnet1
subnet6
-------------------------------------------------------------------------
deny allow
allow
admin(network.fw.submap)>
Shows all default access exception rules for subnet <from> (one of
subnet2, s3 = subnet3, s4
subnet2
allow
= subnet4, s5 = subnet5, s6
subnet3 subnet4
allow deny
(log enabled)
s1 = subnet1,
= subnet6) to all other subnets.
subnet5
allow
s2 =