3.43.3 Network WLAN WLAN IP Filter Policy del Command
del
Network WLAN WLAN IP Fiter Policy Commands
Deletes a entry from the IP Filter association table.
Syntax
del <wlan-idx> [all|<index>]
Syntax:
delete <wlan-idx>
[all|<index>]
Example
admin(network.wlan.wlanipfpolicy)> show 1
-------------------------------------------------------------------------
Filter-Name
-------------------------------------------------------------------------
allow_tcp
allow_tcp
IP Filter Mode
Default Incoming Action
Default Outgoing Action
admin(network.wlan.wlanipfpolicy)> del 1 2
admin(network.wlan.wlanipfpolicy)> show 1
-------------------------------------------------------------------------
Filter-Name
-------------------------------------------------------------------------
allow_tcp
IP Filter Mode
Default Incoming Action
Default Outgoing Action
Deletes an IP Filter association table entry. The WLAN is specified by the
<wlan-idx> (1-8). <index> indicates the filter to delete.
all entries from the IP Filter association table.
Direction
Action
incoming
allow
outgoing
deny
: enable
: allow
: allow
Direction
Action
incoming
allow
: enable
: allow
: allow
Network CLI Commands Reference
all
is used to delete
3-229
Need help?
Do you have a question about the WS2000 - Wireless Switch - Network Management Device and is the answer not in the manual?