Set; Users - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

3-130 WS2000 Wireless Switch System Reference Guide
3.25.1 Network WAN DynDNS set Command

set

Network WAN DynDNS Commands
Sets the DynDNS parameters
Syntax
set [mode|username|password|hostname]
set mode <mode>
set username <username>
set password <password>
set hostname <hostname>
Parameters
mode <mode>
username <username> Sets the DynDNS user name to <username> (1-32 characters)
password <password> Sets the password to <password> (1-32 characters) for the DynDNS username
hostname <hostname> Sets the DynDNS server host name to <hostname> (1-32 characters).
Example
admin(network.wan.dyndns)>set mode enable
admin(network.wan.dyndns)>set username JohnDoe
admin(network.wan.dyndns)>set password JohnDoe
admin(network.wan.dyndns)>set hostname motPropServ
admin(network.wan.dyndns)>show
DynDNS Configuration
Mode
Username
Password
Hostname
DynDNS Update Response
IP Address
Hostname
Status
Enables or disables DynDNS. <mode> can be
<username>.
: enable
: JohnDoe
: ********
: motPropServ
: 192.168.10.1
: motPropServ
: Connected
enable or disable.