Copydefaults - Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual

3.2.2 Network AP copydefaults Command

copydefaults

Network AP Commands
Copies default Access Port settings to a connected Access Port.
In the Web interface, the defaults are set on the Wireless, default AP screens (one for each radio type).
Syntax
copydefault <idx>
Parameters
<idx>
Example
admin(network.ap)>copydefaults 1
admin(network.ap)>
Related Commands
network.ap.default)>
show default
show status
show ap
The id of the AP to copy the defaults to
Lists the current default settings for a selected Access Port type.
Lists the index numbers for all currently connected Access Ports.
Gets information about a particular Access Port.
Network CLI Commands Reference
3-5