Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual page 55

short-pre <type>
[enable|disable]
sensor-img <loc>
ap4131-img <loc>
ap4121-img <loc>
Example
admin(network.ap.default)>set ch_mode 802.11a fixed
admin(network.ap.default)>set dtim 802.11a 10
admin(network.ap.default)>set short 802.11b/g enable
admin(network.ap.default)>show default 802.11a
ap indoor use
ap channel
ap channel mode
ap radio power
ap diversity
basic rates
supported rates
rts threshold
beacon interval
-------------------------------------------------------------------------
BSSID | DTIM period
-------------------------------------------------------------------------
1 | 10
2 | 10
3 | 10
4 | 10
short preamble
primary wlan index
admin(network.ap.default)>
Related Commands
show default Displays the default AP settings for a particular radio type.
By default, enables or disables the short preamble mode for radios of
specified <type> (one of 802.11a, 802.11b, or 802.11b/g).
Sets the default location of the sensor image. Location is specified in the
<loc> parameter.
Sets the default location <loc> of the AP 4131 image. Select from
Sets the default location <loc> of the AP 4121 image. Select from
: indoor only
: 36
: random
: 17 dBm
: 50 mW
: full
: 6 12 24
: 6 9 12 18 24 36 48 54
: 2341
: 100
: disable
: wlan1
Network CLI Commands Reference
cf or def.
cf or def.
3-19