Motorola WS2000 - Wireless Switch - Network Management Device Cli Reference Manual page 447

5.3.2 Stats RF show Command
show
Statistics RF Commands
Shows radio frequency (RF) statistics.
Syntax
show [all|wlan|ap|mu|mesh-base|mesh-client|total]
show all [wlan|ap|mu|mesh-base|mesh-client]
show wlan <idx>
show ap <idx>
show mu <mu>
show mesh-base <base>
show mesh-client <client>
show total
Syntax:
show all [wlan|ap|mu|
mesh-base|mesh-client]
show wlan <idx>
show ap <idx>
show mu <mu>
show mesh-base <base> Shows the statistics for the mesh base with index <base> (1-36).
show mesh-client
<client>
show total
Example
admin(stats.rf)>show all wlan
Index
Name
Status
Index
Name
Status
Index
Name
Status
Index
Shows all statistics for:
• wlan – Shows all WLAN status.
• ap – Shows all Access Port status.
• mu – Shows all mobile unit (MU) status.
• mesh-base – Shows all mesh-base statistics
• mesh-client – Shows all mesh-client statistics
Shows the specified WLAN's statistics, where <idx> is the index number of the
WLAN.
Shows the specified Access Port's statistics, where <idx> is the index number
of the Access Port (1–12).
Shows the specified mobile unit's statistics, where <mu> is the index number of
the mobile unit (1–200).
Shows the statistics for the mesh client with index <client> (1-72).
Shows total switch statistics.
: 1
: WLAN1
: Enabled
: 2
: WLAN2
: Disabled
: 3
: WLAN3
: Disabled
: 4
5-7
Statistics Commands