4-20 WS2000 Wireless Switch System Reference Guide
4.4.8 System Config sensor-fw-update Command
sensor-fw-update
System Configuration Commands
Performs firmware update for the sensors. When sensor firmware update is done,
• No restart is required.
• New sensors receive the updated firmware.
• Existing sensors must be reverted and then reassigned for them to get the new sensor firmware image.
Syntax
sensor-fw-update [ftp|tftp|sftp]
Parameters
sensor-fw-update
[ftp|tftp]
Example
admin(system.config)>sensor-fw-update tftp
File transfer
admin(system.config)>
Updates the sensor firmware.
• ftp – Updates the sensor firmware from the specified FTP server.
• tftp – Updates the sensor firmware from the specified TFTP server.
• sftp – Updates the sensor firmware from the specified SFTP server.
:
[Successful]